FREE SURFACE FLOW SIMULATION AROUND AN APPENDED SHIP HULL

ÖZDEMİR Y. H., Barlas B.

BRODOGRADNJA, cilt.69, sa.3, ss.25-41, 2018 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 69 Sayı: 3
  • Basım Tarihi: 2018
  • Doi Numarası: 10.21278/brod69302
  • Dergi Adı: BRODOGRADNJA
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.25-41
  • Anahtar Kelimeler: Computational Fluid Dynamics, Experiment, Turbulent free surface flows, Appendages, k-epsilon turbulence model, RESISTANCE, MODEL, OPTIMIZATION, SCALE, WATER, WAKE, CFD
  • Çanakkale Onsekiz Mart Üniversitesi Adresli: Evet

Özet

This study brings forward the results of previously published work of free surface flow simulation around a fast ship model. Experimental measurements and numerical simulations of a fast bare-hull ship model form are now extended to the same ship form with appendices for a wide range of Froude numbers. The governing equations are discretized by means of an unstructured finite volume mesh. The standard k-epsilon turbulence model and Volume of Fluid Method to capture the two phase media are used. The total resistance, due to wave and wake fields of the ship model with appendages and the resistance of the appendages alone are calculated numerically, and compared with the experiments. The experiments and computations were performed for 11 different Froude numbers between 0.103 and 0.322. For Froude numbers up to 0.25, numerical simulations found to be quite in agreement with the experiments. It has been found that appendages increase the total drag mainly by increasing the pressure resistance, and the effect of the appendages becomes more important as the flow speed gets higher.