Pervaporative desalination of seawater using a polyvinylidene fluoride based membrane


Nigiz F., HİLMİOĞLU N.

WATER SCIENCE AND TECHNOLOGY-WATER SUPPLY, cilt.18, sa.5, ss.1674-1681, 2018 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 18 Sayı: 5
  • Basım Tarihi: 2018
  • Doi Numarası: 10.2166/ws.2017.228
  • Dergi Adı: WATER SCIENCE AND TECHNOLOGY-WATER SUPPLY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1674-1681
  • Anahtar Kelimeler: pervaporative desalination, polyvinylidene fluoride (PVDF), polyvinyl pyrrolidone (PVP), salt retention, seawater desalination, WATER DESALINATION, TECHNOLOGY, SEPARATION, OSMOSIS, REMOVAL, QUALITY
  • Çanakkale Onsekiz Mart Üniversitesi Adresli: Hayır

Özet

Producing a fresh water supply by converting non-potable water is an attractive solution when water is scarce. According to the energy strategies of different countries, various seawater purification techniques such as distillation and reverse osmosis (RO) are used to produce fresh water. Due to the selective separation capability and cost-effective properties, membrane based methods such as RO, electrodialysis, and ultra/micro/nano/filtration are prevalent, especially in Europe. Recently, innovative desalination technologies have been investigated by researchers. Among them, pervaporative separation, in which non-porous membranes are used, appears to be an emerging and promising method. The key part of the system is the membrane. Hence, scientific investigations are focused on the production of high-performance membranes. In this study, non-porous polyvinylidene fluoride (PVDF) and polyvinyl pyrrolidone (PVP) blend membranes were prepared in different PVDF/PVP ratios and Marmara seawater was desalinated using the pervaporation method at different temperatures. Desalination performance was evaluated as a function of flux and salt retention. The highest salt retention of 99.90% and flux of 1.60 kg/m(2). h were obtained at 60 degrees C when the PVDF/PVP ratio was 1.5.