Supercritical CO2 processing of a chitosan-based scaffold: Can implantation of osteoblastic cells be enhanced?

Creative Commons License

Ozdemir E., Sendemir-Urkmez A., Yesil-Celiktas O.

JOURNAL OF SUPERCRITICAL FLUIDS, cilt.75, ss.120-127, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 75
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/j.supflu.2012.12.031
  • Dergi Adı: JOURNAL OF SUPERCRITICAL FLUIDS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.120-127
  • Çanakkale Onsekiz Mart Üniversitesi Adresli: Evet

Özet

The effects of fabrication techniques were investigated for preparation of a chitosan based scaffold. A two-step process was used: fabrication of hydrogel which was subsequently processed either with supercritical CO2 (SC-CO2) or lyophilization. Various pressures from subcritical to supercritical (70, 160, 250 bar), temperatures (35, 45, 55 degrees C) and durations (2-3 h) were applied in order to elicit the optimum process parameters yielding the highest porosity which were determined as 250 bar, 45 degrees C, 2 h of processing at 5 g/min CO2 flow rate yielding a porosity of 87.03% which was similar to lyophilization (88.68%) achieved at 55 degrees C for 48 h. When osteosarcoma cells possessing cellular features of osteoblasts were seeded, SC-CO2 dried scaffold proved to be a more ideal support for cell attachment owing to the presence of both nano and micropores, thereby providing a more efficient and rapid alternative for tissue engineering applications. (c) 2013 Elsevier B.V. All rights reserved.

The effects of fabrication techniques were investigated for preparation of a chitosan based scaffold. A two-step process was used: fabrication of hydrogel which was subsequently processed either with supercritical CO2(SC-CO2) or lyophilization. Various pressures from subcritical to supercritical (70, 160, 250 bar), temperatures (35, 45, 55 °C) and durations (2–3 h) were applied in order to elicit the optimum process parameters yielding the highest porosity which were determined as 250 bar, 45 °C, 2 h of processing at 5 g/min CO2 flow rate yielding a porosity of 87.03% which was similar to lyophilization (88.68%) achieved at 55 °C for 48 h. When osteosarcoma cells possessing cellular features of osteoblasts were seeded, SC-CO2dried scaffold proved to be a more ideal support for cell attachment owing to the presence of both nano and micropores, thereby providing a more efficient and rapid alternative for tissue engineering applications.