Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Estimation of the optimum cutting parameters for surface roughness in wire electrical discharge machining of nickel based waspaloy using Taguchi method

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.32, pp.195-204, 2017 (Journal Indexed in SCI) identifier identifier

The effects of process parameters on acceleration amplitude in the drilling of cold work tool steels

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.80, pp.1387-1401, 2015 (Journal Indexed in SCI) identifier identifier

Evaluation of drilling Al/SiC composites with cryogenically treated HSS drills

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.74, pp.1495-1505, 2014 (Journal Indexed in SCI) identifier identifier

MODELING OF THE EFFECTS OF PARAMETERS ON DIMENSIONAL ACCURACY IN LASER CUTTING OF AISI 304 STEEL WITH DIFFERENT GEOMETRIES

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.29, pp.505-515, 2014 (Journal Indexed in SCI) identifier identifier

The Optimization of Machining Parameters Using the Taguchi Method for Surface Roughness of AISI 8660 Hardened Alloy Steel

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, vol.56, no.6, pp.391-401, 2010 (Journal Indexed in SCI) identifier identifier

THE INVESTIGATION OF TOOL LIFE AND WEAR IN THE MACHINING OF NON-HEAT TREATED AND SPHEROIDIZED AISI52100 BEARING STEEL WITH DIFFERENT CUTTING TOOLS

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.25, no.1, pp.65-75, 2010 (Journal Indexed in SCI) identifier identifier

Surface roughness model in machining hardened steel with cubic boron nitride cutting tool

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, vol.26, no.2, pp.84-90, 2008 (Journal Indexed in SCI) identifier identifier

Surface roughness model for machining mild steel with coated. carbide tool

MATERIALS & DESIGN, vol.26, pp.321-326, 2005 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Laminat Kompozitin Cep Frezelenmesinde Yüzey Pürüzlülüğü Ve Boyutsal Tamlığın Değerlendirilmesi

DÜZCE ÜNİVERSİTESİ BİLİM VE TEKNOLOJİ DERGİSİ, vol.6, no.1, pp.79-100, 2018 (National Refreed University Journal) Creative Commons License

Laminant Kompozitin Cep Frezelenmesinde Yüzey Pürüzlülüğü Ve Boyutsal Tamlığın Değerlendirilmesi

Düzce Üniversitesi Bilim Ve Teknoloji Dergisi, vol.6, no.1, pp.79-100, 2018 (Other Refereed National Journals)

Kompakt Laminat Kompozitlerin Parmak Freze İle Delinmesinde Takım Aşınmasının Yüzey Pürüzlülüğü Ve Boyutsal Tamlık Üzerine Etkileri

Düzce Üniversitesi İleri Teknoloji Bilimleri Dergisi, vol.6, no.3, pp.180-192, 2017 (National Refreed University Journal) Sustainable Development

Kompakt Laminat Panellerin Delinmesinde Delik Girişi Ve Çıkışı Delaminasyon Faktörü İçin Delme Parametrelerinin Optimizasyonu

Düzce Üniversitesi İleri Teknoloji Bilimleri Dergisi, vol.6, no.3, pp.167-179, 2017 (National Refreed University Journal)

Kompakt Laminat Kompozit Malzemenin Tungsten Karbür Takımlarla Delinmesinde Delaminasyon Faktörünün Değerlendirilmesi

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ, vol.23, no.4, pp.427-436, 2017 (Journal Indexed in ESCI) Sustainable Development

Kompakt Laminatın Delinmesinde Boyutsal Tamlık İçin Delme Parametrelerinin Gri İlişkisel Analiz İle Optimizasyonu

Süleyman Demirel Üniversitesi Uluslararası Teknolojik Bilimler Dergisi, vol.9, no.2, pp.1-22, 2017 (National Refreed University Journal) Sustainable Development

Evaluation of the delamination factor for drilling of compact laminate composite material with tungsten carbide tools

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, vol.23, no.4, pp.427-436, 2017 (Journal Indexed in ESCI) identifier

Wire Electrical Discharge Machining of a Hybrid Composite Evaluation of Kerf Width and Surface Roughness

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.21, no.1, pp.245-260, 2016 (International Refereed University Journal)

Evaluation of drilling Al/B4C composites with carbide drills

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, vol.22, pp.259-266, 2016 (Journal Indexed in ESCI) identifier

Surface Roughness Evaluation When Machining Carbon Steel With Ceramic Cutting Tools

Uludağ Üniversity Journal of The Faculty of Engineering and Architecture, vol.14, no.1, pp.139-145, 2009 (Other Refereed National Journals)

Nikel Esaslı Süperalaşımların Ve Titanyum Alaşımlarının İşlenebilirliği 1 Bölüm Sinterlenmiş Karbür Takımların Performanslarının Değerlendirilmesi

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.25, no.1, pp.302-330, 2009 (National Refreed University Journal) Sustainable Development

THE DEVELOPMENT OF SURFACE ROUGHNESS MODEL WHEN TURNING HARDENED STEEL WITH CERAMIC CUTTING TOOL USING RESPONSE METHODOLOGY

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, vol.4, pp.291-304, 2008 (Journal Indexed in ESCI) identifier identifier

Isıl İşlemle Sertliği 53 HRC ye Çıkarılmış AISI 1050 Çeliğinin Kaplamalı Karbür Takımla İşlenmesinde Takım Aşınmasının Değerlendirilmesi

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, vol.12, no.3, pp.379-388, 2006 (Other Refereed National Journals) Sustainable Development

Surface Roughness Prediction Model in Machining of Carbon Steel by PVD Coated Cutting Tools

American Journal of Applied Sciences, vol.1, no.1, pp.12-17, 2004 (Refereed Journals of Other Institutions)

Elimination of the Quality Problems Encountered in Mass Production by Using Statistical Quality Control

Turkish Journal of Engineering and Environmental Sciences, vol.27, no.1, pp.83-93, 2003 (Refereed Journals of Other Institutions) identifier

Farklı Cep İşleme Çevrimlerinin İşleme Süresi ve Yüzey Pürüzlülük Kriterine Göre İncelenmesi

Makine Tasarım ve İmalat Dergisi, vol.4, no.3, pp.134-139, 2002 (Other Refereed National Journals)

CNC Freze Tezgahlarında Optimum Kesme Süresi ve Üretim Maliyetlerine Göre Kesme Parametrelerinin Optimizasyonu

GAZI UNIVERSITY JOURNAL OF SCIENCE, vol.15, no.3, pp.737-746, 2002 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

CARALL Kompozitlerin Delinmesinde Elyaf Yönelimi Ve Delme Parametrelerinin Delaminasyona Etkisinin Değerlendirilmesi

5.Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Turkey, 24 April 2021, vol.1, pp.232-239

İş Sağlığı ve Güvenliği Faaliyetlerinde Yapay Zekâ ve Uzman Sistem Uygulamalarının Değerlendirilmesi

5.Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, İstanbul, Turkey, 24 April 2021, vol.1, pp.240-248

Occupational Safety Culture of AFAD and Fire Fighting Teams: An Evaluation in Terms of Management Commitment, Occupational Safety Training and Reporting Culture

International Symposium of Scientific Research and Innovative Studies, Balıkesir, Turkey, 22 - 25 February 2021, vol.1, no.1, pp.404-415 Creative Commons License Sustainable Development

CFRP/Al2024 Metalik Yığınların Farklı Geometrili Matkaplarla Delinmesinde Delaminasyon Faktörünün Optimizasyonu

Uluslararası Malzeme ve Mühendislik Teknolojileri Konferansı, Gaziantep, Turkey, 5 - 07 November 2020, pp.45-53

Cam Laminat Alüminyum Takviyeli Epoksinin (GLARE) Özel Geometrili Matkaplarla Delinmesi: Delaminasyon Faktörü Üzerine Bir Çalışma

Uluslararası Malzeme ve Mühendislik Teknolojileri Konferansı, Gaziantep, Turkey, 5 - 07 November 2020, pp.32-44

Optimization of Control Factors for Minimum Delamination Factor in CFRP in Drilling of CFRP/Ti6Al4V Stacks with Step Drill

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.133-139

Evaluation of The Effect of Tool Geometry and Drilling Parameters on Thrust Force in Carbon Fiber Reinforced Aluminum Laminates (CARALL)

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.128-132

Investigation of The Effects of Occupational Safety Inspections on Work Safety Cultures of Working Technical Staff: A Research on Auto Services

Selçuk Zirvesi 2. Uluslararası Uygulamalı Bilimler Kongresi, Konya, Turkey, 07 June 2020, vol.1, pp.172-182

Preparation and Evaluation of Noise Map for A Textile Weaving Factory Workshop

Uluslararası 29 Ekim Bilimsel Araştırmalar Sempozyumu, İzmir, Turkey, 26 - 29 October 2019, vol.1, pp.307-320 Sustainable Development

Creating Industrial Noise Maps for Machine-Metal Sector Closed Area Production Environments: A Case Study for A Press Workshop

Uluslararası 29 Ekim Bilimsel Araştırmalar Sempozyumu, İzmir, Turkey, 26 - 29 October 2019, vol.1, pp.321-336 Sustainable Development

B4C Parçaçık Takviye Oranı ve Delme Parametrelerinin MMC Kompozitlerin Delme Karakteristiklerine Etkileri

II. International Conference on Advanced Engineering Technologies, (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017, vol.1, no.1, pp.207-218

Drillability of Al/15B4C Composites with Cryogenically Treated Tools: Evaluation of Tool Life, Tool Wear and Surface Roughness

1stInternational Conference of Advanced Materials and Manufacturing Technologies, Karabük, Turkey, 25 - 27 October 2017, vol.1, no.1, pp.35-41

Kompakt Laminat Kompozitlerin Parmak Freze İle Delinmesinde Takım Aşınmasının Yüzey Pürüzlülüğü Ve Boyutsal Tamlık Üzerine Etkileri

4. International Furniture and Decoration Congress (UMDK 2017), Düzce, Turkey, 19 - 21 October 2017, vol.1, no.1, pp.227-239 Sustainable Development

Kompakt Laminat Panellerin Delinmesinde Delik Girişi Ve Çıkışı Delaminasyon Faktörü İçin Delme Parametrelerinin Optimizasyonu

4. International Furniture and Decoration Congress (UMDK 2017), Düzce, Turkey, 19 - 21 October 2017, vol.1, no.1, pp.213-226

Multi-Objective Optimization of Drilling Parameters in Drilling of Al/10B4C/5Gr Hybrid Composites using Taguchi Based Gray Relational Analysis

1st International Conference of Advanced Materials and Manufacturing Technologies, Karabük, Turkey, 25 - 27 October 2017, vol.1, no.1, pp.27-34

Optimization of Machining Parameters in the Drilling of Al/B4C/Gr Composites via Taguchi based Gray Relational Analysis and TOPSIS Method

II. International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017, vol.1, no.1, pp.197-206

Optimization of Surface Roughness, Delamination and Uncut Fiber Factor in the Drilling of CFRP Composites

1st International Conference of Advanced Materials and Manufacturing Technologies, Karabük, Turkey, 25 - 27 October 2017, vol.1, no.1, pp.21-26

The Effect of Cryogenic Treatment on Surface Roughness and Delamination Factor in the Drilling of CFRP Composites

8. International Advanced Technologies Symposium (IATS 2017), Elazığ, Turkey, 19 - 22 October 2017, vol.1, no.1, pp.615-623

Evaluation Of The Effects Of Cryogenic Treatment Applied To The Tool In The Drilling Of Mixed Composites On Surface Roughness

UMTIK-2016, 17th International Conference on Machine Design and Production, Bursa, Turkey, 12 - 15 July 2016, vol.1, pp.1-12 Sustainable Development

Evaluation Of Surface Roughness In The Drilling Of Compact Laminate Composite

UMTIK-2016, 17th International Conference on Machine Design and Production, Bursa, Turkey, 12 - 15 July 2016, vol.1, pp.1-17 Sustainable Development

The Determination of Occupational Health and Safety Awareness of Vocational School Students

UMYOS 2016 V. Uluslararası Meslek Yüksekokulları Sempozyumu, Prizren, Kosovo, 18 - 20 May 2016, vol.2, pp.277-286 Sustainable Development

The Impact of Entrepreneurial Personality Traits Entrepreneurial Trends: Automotive Technology Program Example

UMYOS 2016. V. Uluslararası Meslek Yüksekokulları Sempozyumu, Prizren, Kosovo, 18 - 20 May 2016, vol.2, pp.1-10 Sustainable Development

Effects Of Different Parameters On Hole Surface Roughness In Drilling

UMYOS-4th International Vocational Schools Symposium, Yalova, Turkey, 21 - 23 May 2015, pp.745-753

Evaluation of Cutting Tool Wear Characteristics and Removed Chip Volumes in Drilling of AISI D2 and AISI D3 Cold Work Tool Steels

IATS 2013 7th International Advanced Technologies Symposium, İstanbul, Turkey, 30 November - 01 December 2013, pp.304-312 Sustainable Development

Statistical Evaluation of Effects of Manufacturing Parameters on Cutting Tool Wear in Drilling of AISI D2 and AISI D3 Cold Work Tool Steels

IATS 2013 7th International Advanced Technologies Symposium, İstanbul, Turkey, 30 November - 01 December 2013, pp.423-430 Sustainable Development

Predictive Modeling Of Surface Roughness In Turning Of Spheroidized AISI 52100 Steel With Different Cutting Tools

UTİS 2013 4. Ulusal Talaşlı İmalat Sempozyumu, Aydın, Turkey, 7 - 09 November 2013, pp.1-16

AISI 52100 Çeliğinin Farklı Kesici Takımlarla Tornalanmasında Yüzey Pürüzlülüğünün Tahminsel Modellenmesi

GİS 2013- Genç İstatistikçiler Sempozyumu, Ankara, Turkey, 10 - 11 September 2013, pp.1-8

The Tool Life Models of Cutting Tools Using the Taguchi Method when Turning Hardened Steel

13th International Conference on Machine Design and Production, İstanbul, Turkey, 3 - 05 September 2008, pp.1-8

The Influence of Martensite Morphology on Surface Roughness of AISI 4140 Steel with Dual Phase Steel Structure

13th International Metallurgy Materials Congress, İstanbul, Turkey, 9 - 11 November 2006, pp.412-418

Sertleştirilmiş AISI 1040 Çeliğinin Kaplamasız ve Kaplamalı Seramik Kesicilerle Tornalanmasında Yüzey Pürüzlülüğünün Modellenmesi

IATS 2005, 4th International Advanced Technologies Symposium, Konya, Turkey, 28 - 30 September 2005, pp.853-859

The Surface Finish in Turning of AISI 1050 Steel by Different Cutting Tools

International Scientific and Technical Conference, Modern Problems of Mechanical Engineering and Instrument Making, Baku, Baku, Azerbaijan, 26 - 28 September 2005, pp.296-302

The Machining Performance of Cutting Tools in Terms of Surface Roughness

International Scientific and Technical Conference, Modern Problems of Mechanical Engineering and Instrument Making, Baku, Baku, Azerbaijan, 26 - 28 September 2005, pp.268-274

Modeling the Surface Roughness in Machining of AISI 4140 Steel

International Scientific and Technical Conference, Modern Problems of Mechanical Engineering and Instrument Making, Baku, Baku, Azerbaijan, 26 - 28 September 2005, pp.238-244

AISI 4140 Çeliğinin Farklı Kaplamalı Karbür ve Sermet Kesici Takımlarla İşlenebilirliği

UMTİK 2004, International Conference on Machine Design and Production, Antalya, Turkey, 13 - 15 October 2004, pp.1-10 Sustainable Development

A model For Surface Roughness in Turning of AISI 4140 Steel Using Coated Carbide Cutting Tool

UMTİK 2004, International Conference on Machine Design and Production, Antalya, Turkey, 13 - 15 October 2004, pp.1-10

An Experimental Investigation of Surface Roughness and Chip Disposability of AISI 4140 Steel Having Various Microstructures

UMTİK 2004, International Conference on Machine Design and Production, Antalya, Antalya, Turkey, 13 - 15 October 2004, pp.1-10

Sertleştirilmiş AISI 1040 Çeliğinin Seramik Kesici Takımla İşlenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Değerlendirilmesi

UMTİK 2004, International Conference on Machine Design and Production, Antalya, Turkey, 13 - 15 October 2004, pp.1-10

Prediction of Surface Roughness in the Machining of Carbon Steels by Cutting Tools

NUMIFORM 2004, Proc. 8th International Conference on Numerical Methods in Industrial Forming Processes, Columbus, Ohio, AIP Conference Proceedings, Ohio, United States Of America, 13 - 17 June 2004, vol.712, pp.1414-1419 identifier

Wear Property of Al2O3-Particle-Reinforced Aluminium Composite

ASIATRIB 2002-International Conference and Symposium, Jeju İsland, South Korea, 21 - 24 October 2002, pp.201-202

Books & Book Chapters

İş Kazası Etmeni Olarak Kayma, Tökezleme ve Düşme (KTD): Türkiye İncelemesi

in: Mühendislik ve Multidisipliner Yaklaşımlar, Prof. Dr. Abdulkadir Güllü,Dr. Öğr. Üyesi Senai Yalçınkaya, Editor, Güven Plus Grup A.Ş. Yayınları, İstanbul, pp.572-592, 2021 Sustainable Development

Yeni İş Yeri Riskleri Ve Yapay Zekânın İş Sağlığı Ve Güvenliğinde Kullanımı

in: Mühendislik ve Multidisipliner Yaklaşımlar, Prof. Dr. Abdulkadir Güllü,Dr. Öğr. Üyesi Senai Yalçınkaya, Editor, Güven Plus Grup A.Ş. Yayınları, İstanbul, pp.369-402, 2021 Sustainable Development